Bittel MODA Series - Setting the Alarm Clock; Snooze Feature Operation; Adjusting Clock Brightness; Clock Module Battery

_______________________________________________________________________
BITTEL Page 7 of 14 MODA
and date
2) Press ALARM for 2s again, it will display the year
3) When it displays the year, the Summer time zone will
also be displayed.
4) The date need be adjusted by cloner
2. Setting Alarm
Press ALARM button, then press SET button will set the hour; press
SET again can set the minute. Both should be adjusted by the ▼
button. Press SET for the third time will finish the setting.
Note: Each time when the ▼ button is pressed, it will reduce 5
minutes
3. SNOOZE feature
Press SET or▼ button, the alarm will enter into Snooze mode, w
and will ring again after 10 minutes.
Without any operation, the alarm will ring for 5 minutes.
4.Adjusting the brightness
1) The brightness can be auto dimmed with ambient light
Sensor.
2) The brightness can be adjusted by directly press ▼ button,
Which is 5 levels.
4. Battery
The back-up battery is BL-5C Lithium Battery, 1000mAH and 3.7V.
Without external power, the back-up battery will keep the LCD in
middle-light. Further more, it can make the LCD to show the time and
guarantees the Alarm can well work.
If it needs change new battery, please remove the battery-cabinet
cover, take off the old
5. Setting time