Bittium Tough Mobile 2 User Manual

Bittium Tough Mobile 2 Quick Start Guide
12
Important health and
safety precautions
Please take the following safety
precautions when using the device:
WARNINGS
Only use the chargers approved by Bittium Wireless
Ltd. The use of non-Bittium approved chargers may
be dangerous.
Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged
periods of time.
Do not use the charger if it has a visible defect,
or if you suspect it is damaged.
Do not allow children to play with the device since
it contains small parts that can become detached
and create a choking hazard.
In Japan, USA and Canada, use 5GHz WLAN only
indoors.
CAUTIONS
The material used in the display and back cover is
glass. The display and back cover can break if your
handset is dropped or if it receives a significant
impact. Do not use the device if the screen or back
cover is broken or cracked as this may cause an
injury.
Do not open the device. This will trigger a tampering
event which will erase all data from the phone and it
cannot be used anymore without Bittium service.

Bittium Tough Mobile 2 Specifications

General

Display Size	5.2 inches
Resolution	1920 x 1080 pixels
Processor	Qualcomm Snapdragon 670
RAM	4 GB
Internal Storage	64 GB
Battery Capacity	3000 mAh
Operating System	Android 9.0 (Pie)
Rear Camera	12 MP
Front Camera	5 MP
GPU	Adreno 615
Expandable Storage	microSD, up to 256 GB
Water and Dust Resistance	IP67
Shock Resistance	MIL-STD-810G compliant
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC
GPS	Yes, with A-GPS, GLONASS, BDS, Galileo
Chipset	Qualcomm Snapdragon 670
SIM	Single SIM (Nano-SIM)
Security Features	Hardware-based security
CPU	Octa-core (2x2.0 GHz Kryo 360 Gold & 6x1.7 GHz Kryo 360 Silver)