Bittium Tough Mobile 2 User Manual

Bittium Tough Mobile 2 Quick Start Guide
5
Push the tool gently into
the hole until the SIM tray
pops out. Insert the SIM
card and optional SDHC
card as shown below.
Getting started
To start using the device first open the SIM card
tray and insert the SIM card(s). To open the SIM tray
insert the SIM tray tool into the hole shown below.
Nano SIM card
Micro SDHC card
SIM tray
Insert your primary Nano SIM card onto the SIM
card slot as shown above. If you have a secondary
Nano SIM card, insert it onto the Dual Mode slot.
In case you are not using two SIM cards you can
insert your Micro SDHC card onto the Dual Mode
slot. After the SIM and SD cards are inserted, push
the SIM tray back.

Bittium Tough Mobile 2 Specifications

General

Display Size	5.2 inches
Resolution	1920 x 1080 pixels
Processor	Qualcomm Snapdragon 670
RAM	4 GB
Internal Storage	64 GB
Battery Capacity	3000 mAh
Operating System	Android 9.0 (Pie)
Rear Camera	12 MP
Front Camera	5 MP
GPU	Adreno 615
Expandable Storage	microSD, up to 256 GB
Water and Dust Resistance	IP67
Shock Resistance	MIL-STD-810G compliant
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, NFC
GPS	Yes, with A-GPS, GLONASS, BDS, Galileo
Chipset	Qualcomm Snapdragon 670
SIM	Single SIM (Nano-SIM)
Security Features	Hardware-based security
CPU	Octa-core (2x2.0 GHz Kryo 360 Gold & 6x1.7 GHz Kryo 360 Silver)