Bitzer CSH7563-80Y User Manual

SB-170-10
Halbhermetische Kompaktschraubenverdichter
Originalbetriebsanleitung
Deutsch .................................................................................................................................................... 2
Semi-hermetic compact screw compressors
Translation of the original Operating Instructions
English...................................................................................................................................................... 41
Compresseurs à vis compacts hermétiques accessibles
Traduction des instructions de service d'origine
Français.................................................................................................................................................... 80
CSH6553..CSH6593
CSH7553 .. CSH7593
CSH8553 .. CSH8593
CSH9553 .. CSH95113
CSH10563 .. CSH10573
CSH7673 .. CSH7693
CSH8673 .. CSH8693
CSH9663 .. CSH96113
CSK6153 .. CSK6163
CSK7153 .. CSK7193
CSW6583 .. CSW6593
CSW7573 .. CSW7593
CSW8573 .. CSW8593
CSW9563 .. CSW95113
CSW10563 .. CSW10593
Dokument für Monteure
Document for installers
Document pour des monteurs

Bitzer CSH7563-80Y Specifications

General

Brand	Bitzer
Model	CSH7563-80Y
Category	Air Compressor
Language	English

Summary

Safety

Authorized staff

Requirements for personnel performing work on compressors.

Residual risks

Identification of unavoidable risks associated with compressor operation.

Safety references

Definitions and types of safety warnings used in the manual.

General safety references

Specific safety instructions for compressor operation and handling.

Commissioning

Checking pressure strength

Procedure for verifying the pressure resistance of the refrigerant circuit.

Checking tightness

Method for testing the leak-proofness of the system.

Evacuation

Steps for removing air and moisture from the system.

Charging refrigerant

Instructions for filling the system with refrigerant.

Checks prior to compressor start

Compressor start

Checking the rotation direction

Procedure to verify the correct rotation direction of the compressor.

Lubrication/oil level monitoring

How to check oil level and lubrication after starting.

Set high and low pressure switches

Set the condenser pressure

Electrical connection

Dimensioning components

Motor versions and starting methods

Control logic requirements

Safety switching devices

Importance and setting of high and low pressure switches.

Compressor protection devices

Overview of built-in protection devices like SE-E1, CM-SW-01.

Oil circuit monitoring and oil heater

Operation

Regular tests

Locking the protection and monitoring devices