Bitzer CSH7583-100Y User Manual

SB-170-10
Halbhermetische Kompaktschraubenverdichter
Originalbetriebsanleitung
Deutsch .................................................................................................................................................... 2
Semi-hermetic compact screw compressors
Translation of the original Operating Instructions
English...................................................................................................................................................... 41
Compresseurs à vis compacts hermétiques accessibles
Traduction des instructions de service d'origine
Français.................................................................................................................................................... 80
CSH6553..CSH6593
CSH7553 .. CSH7593
CSH8553 .. CSH8593
CSH9553 .. CSH95113
CSH10563 .. CSH10573
CSH7673 .. CSH7693
CSH8673 .. CSH8693
CSH9663 .. CSH96113
CSK6153 .. CSK6163
CSK7153 .. CSK7193
CSW6583 .. CSW6593
CSW7573 .. CSW7593
CSW8573 .. CSW8593
CSW9563 .. CSW95113
CSW10563 .. CSW10593
Dokument für Monteure
Document for installers
Document pour des monteurs

Bitzer CSH7583-100Y Specifications

General

Model	CSH7583-100Y
Power	100 hp
Weight	392 kg
Frequency	50/60 Hz
Number of Cylinders	6
Cylinder Arrangement	N/A (Screw Compressor)

Summary

Introduction

Safety

Authorized staff

Specifies requirements for personnel performing work on compressors.

Safety references

General instructions and warnings for safe operation and handling.

Commissioning

Checking pressure strength

Procedure for verifying the pressure strength of the refrigerant circuit.

Mounting

Transporting the compressor

Instructions for safely transporting the compressor to its installation site.

Installing the compressor

Instructions for mounting the compressor in its final position.

General safety references

Application ranges

Use of flammable refrigerants of the A2L safety group

Guidelines for using flammable refrigerants safely.

Compressor start

Checking the rotation direction

Procedure to verify the correct rotation direction of the compressor motor.

Lubrication/oil level monitoring

Instructions for monitoring oil level and lubrication during compressor operation.

Set high pressure and low pressure switches (HP + LP)

Setting the pressure cut-in and cut-out points for safety switches.

Evacuation

Charging refrigerant

Checks prior to compressor start

Particular notes on safe compressor and system operation

Connecting the pipelines

Capacity control (CR) and start unloading (SU)

Connections and dimensional drawings

Electrical connection

Motor versions

Safety switching devices for limiting the pressure

Compressor protection devices

CM-SW-01

Monitoring of the oil circuit

Operation

Maintenance

Oil change

Mind when mounting or replacing