To Next PageTo Next Page
Need help?Do you have a question about the Bitzer CSH8573-140Y and is the answer not in the manual?
General| Brand | Bitzer |
|---|---|
| Model | CSH8573-140Y |
| Category | Air Compressor |
| Language | English |
Work on compressors must be done by qualified personnel corresponding to local regulations and guidelines.
Identifies unavoidable residual risks and requires careful reading of operating instructions.
Instructions intended to prevent hazards. Safety references must be stringently observed!
Devices required for limiting the application range and avoiding impermissible operating conditions.
Overview of integrated protection devices for monitoring motor and oil temperature, and rotation direction.
Information on monitoring oil temperature and level using opto-electronic proximity sensors.
Information on the use of A2L safety group refrigerants, including system requirements and operation.
Specifications based on standards like EN378; recommends risk assessment cooperation with a notified body.
Procedure to check the refrigerant circuit for strength pressure, preferably using dried nitrogen.
Procedure to check the refrigerant circuit for tightness, preferably using dried nitrogen.
Steps for evacuating the system using a vacuum pump to achieve a standing vacuum below 1.5 mbar.
Instructions for charging the system with permitted refrigerants, avoiding overcharging.
Detailed steps for starting the compressor, including rotation direction, oil monitoring, and setting switches.
