To Next PageTo Next Page
Need help?Do you have a question about the Bitzer CSH8563-125Y and is the answer not in the manual?
General| Model | CSH8563-125Y |
|---|---|
| Weight | Information not found |
| Frequency | 50/60 Hz |
| Refrigerant | R134a, R407C, R404A, R507 |
| Max Condensing Temperature | 65 °C |
| Power Supply | 380-420V/3/50Hz, 440-480V/3/60Hz |
Covers authorized staff, residual risks, and essential safety references.
Specifies requirements for qualified and authorized staff performing work.
Details unavoidable residual risks and applicable regulations for safe operation.
Provides definitions and importance of safety references for hazard prevention.
Includes general safety notices and warnings for proper compressor operation.
Information on using flammable refrigerants, including safety regulations.
Specifies system requirements and safety regulations for A2L refrigerants.
Outlines requirements for system operation, personal protection, and risk assessment.
Covers pressure strength, tightness, and evacuation procedures before operation.
Details steps for starting the compressor, including rotation, lubrication, and settings.
Procedure to verify the correct rotation direction of the compressor.
Covers horizontal mounting, weather protection, and extreme condition considerations.
Instructions for connecting pipelines, including pipe specifications and shut-off valves.
Explains dual capacity control, start unloading, and solenoid valve activation.
General guidelines and checklist for electrical connection of compressors.
Describes available motor types (part winding, star-delta) and their operation.
Details on high and low-pressure switches for compressor protection.
Overview of integrated protection devices and their functions.
Focuses on monitoring oil temperature and oil level in the compressor circuit.
Covers regular system checks and operational data monitoring.
General advice to observe component manufacturer documentation for maintenance.
Detailed steps for changing compressor oil, emphasizing careful handling.
Steps for safely decommissioning compressors, including standstill and extraction.
General safety warnings and risk assessment for mounting and replacement tasks.
