Bitzer ECOLITE LHL5E/4DES-5Y

KB-206-1
ECOLITE
Air-cooled condensing units with capacity-controlled ECOLINE compressors
English....................................................................................................................................................... 2
ECOLITE
Luftgekühlte Verflüssigungssätze mit leistungsgeregelten ECOLINE Verdichtern
Deutsch ..................................................................................................................................................... 33
ECOLITE
Groupes de condensation refroidis par air avec compresseurs ECOLINE dotés d’une fonction de régu-
lation de puissance
Français..................................................................................................................................................... 64
LHL3E/2EES-2Y
LHL3E/2DES-2Y
LHL3E/2CES-3Y
LHL5E/4FES-3Y
LHL5E/4EES-4Y
LHL5E/4DES-5Y
LHL5E/4CES-6Y
Document for installers
Dokument für Monteure
Document pour des monteurs

Bitzer ECOLITE LHL5E/4DES-5Y Specifications

General

Model	ECOLITE LHL5E/4DES-5Y
Number of cylinders	4
Refrigerant	R134a
Oil type	POE
Voltage	400V/50Hz

Summary

Safety

Authorized Staff

Specifies qualifications for personnel working on the unit.

Residual Risks

Highlights inherent risks and need for careful reading of instructions.

Safety References

Explains the meaning of safety symbols (Notice, Caution, Warning, Danger).

General Safety References

Provides specific safety precautions for state of delivery and operation.

Mounting and Installation

Installing the Condensing Unit

Electrical Connection

Schematic Wiring Diagram

Illustrates the electrical connections and components of the unit.

Commissioning

Setting the Controller

Guide to configuring the controller parameters before operation.

Initial Power-Up and Status

Programming Menu

Compressor and CR II Control

Fan Control Settings

Cold Store and Emergency Control

Application Limits Monitoring

Alarm Messages

Descriptions and meanings of various alarm codes and faults.

Operation

Regular Tests

Procedures for routine checks and inspections by a specialist.

Decommissioning

Standstill Procedures

Procedures for safely stopping and preparing the unit for disassembly.

Disassembly and Component Removal