BIXOLON BCD-3000 - 4. Windows Driver Settings; 4-1 Display Settings

Rev. 1.00
- 6 -
BCD-3000
3. How to Connect & Size
3-1 How to Connect (USB)
1) Install the USB Virtual COM driver.
2) Connect the display cable to the USB port on a PC.
3) Turn on the PC and display. The PC will automatically detect new hardware connected to
the USB port.
4) Once the driver is installed, the display is ready to receive data.
Caution or Warning
- If the PC and Display are connected, the driver may not be
installed properly. Please disconnect the PC when installing
the driver.
Computer
USB
BCD-3000