BIXOLON SLP-DL413 - Printing Two or more Contents on One Side; Lresult; Fontselection:_Sdk_Device_Font_12 Pt; Fontwidth:1 Fontheight:1 Rightsidecharacterspacing:0 Fontrotation:_Sdk_Rotation_Degrees_0

Label Printer SDK for iOS
Rev. 1.04
- 53 -
4-1-3 Printing Two or More Contents on One Side
General Initialize … (Declare ~ Connect)
Reference : 4-1-1 General
// [Contents 1]
Long lResult =
[_printer drawImage: _imageSample.image
stratPosX:100
startPosY:100
width:300];
if(lResult = _SDK_RESULT_SUCCESS)
NSLog(@”drawImage Success”);
// [Contents 2]
lResult =
[_printer drawTextDeviceFont:@"0* 12pt,
70, 220" xPosition:70 yPosition:220
fontSelection:_SDK_DEVICE_FONT_12PT
fontWidth:1 fontHeight:1
rightSideCharacterSpacing:0
fontRotation:_SDK_ROTATION_DEGREES
_0 reverse:NO bold:NO
textAlignment:_SDK_ALIGNMENT_LEFT];
if(lResult = _SDK_RESULT_SUCCESS)
NSLog(@”drawText Success”);
Long lResult = [_printer doPrint:1];
if(lResult = _SDK_RESULT_SUCCESS)
NSLog(@”drawImage Success”);
General DeInitialize … (Declare ~ Connect)
Reference : 4-1-1 General
START
General
DeInitialize
General Initialize
END
doPrint:1
USE