3-2-2 Battery Holder (Optional) Usage
1) Connect the power cord② to the battery
charger ①.
2) Connect the battery charger ① to the
power connector of the battery holder ③.
3) Plug the power cord ② into an electrical
outlet.
4) Insert the battery ④ into the battery
holder ③ until a snapping sound is
heard.
3-2-3 Cigarette Lighter Jack Charger (Optional) Usage
1) Open the Interface Cap ①.
2) Connect the cigarette lighter jack charger
② to the cigarette lighter jack of an
automobile and/or the printer or battery
holder ③ as shown in the image.
WARNING
Turn off the power before charging the
battery for the printer.
To Next Page
Loading...
Need help?
General