4) When the following message box appears, click “Install”.
5) Click “Yes” to reboot the PC.
6) Open the printer properties window in the Windows OS.
※ Control Panel – Hardware and Sound – Device and Printers.
7) In the “Ports” tab click “Configure Port…”.
※ Pass this step if you are using Bluetooth.
8) Match the communication settings to those of the printer. The communication settings of
the printer can be performed by conducting a self-test.
※ Pass this step if you are using Bluetooth.
9) Refer to 5-3 in this document and then change the default value for serial and Bluetooth
communication.
To Next Page
Loading...
Need help?
General
