BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 100 -
GS H
Function:
Selects print position of HRI characters
Code:
ASCII
GS
H
n
Hex
1D
48
n
Decimal
29
72
n
Range:
0 ≤ n ≤ 3, 48 ≤ n ≤ 51
Default:
n = 0
Description:
■ This command selects the printing position of HRI (Human Readable Interpretation) characters when printing a bar
code.
• The printing position is set according to the value of as follows:
n
Printing position
0, 48
Not printed
1, 49
Above the bar code
2, 50
Below the bar code
3, 51
Both above and below the bar code
Remarks:
■ The font of the HRI characters is defined by GS f.
■ The setting of this command remains effective until ESC @, printer reset or power cycling is executed.
Differences:
None

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English