BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 104 -
GS V
Function:
Select cut mode and cut paper
Code:
①
ASCII
GS
V
m
Hex
1D
56
m
Decimal
29
86
m
②
ASCII
GS
V
m
n
Hex
1D
56
m
n
Decimal
29
86
m
n
Range:
① m=0, 1, 48, 49 ② m=65, 66, 0 ≤ n ≤ 255
Default:
None
Description:
This command cuts paper in the specified mode as follows.
m
Function
①
0,48
Executes a partial cut (one point left uncut)
1,49
②
65
Feeds paper to (cutting position + n × vertical motion unit) and executes a partial cut(one point left uncut)
Remarks:
For ①
■ If an auto cutter is not provided, this command is ignored command is executed.
For ②
■ When n = 0, the printer feeds the paper to the cutting position and cuts it.
■ If an auto cutter is not provided, the printer only feeds the paper for specified amount.
■ Vertical motion unit is used for calculating a paper feed amount.
■ Cutting mode is changed only by setting MSW5-1.
Differences:
None

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English