BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 44 -
ESC i
Function:
Partial cut
Code:
ASCII
ESC
i
Hex
1B
69
Decimal
27
105
Range:
None
Default:
None
Description:
This command executes a partial cut of the paper with one point left uncut.
Remarks:
■ The same partial cut as this command is executed using ESC m and GS V.
Differences:
■ This command is effective for the printer equipped with an autocutter.
■ Autocutter operation should be enabled by setting the autocutter control DIP switch.
■ If the autocutter control DIP switch of the printer not equipped with autocutter is set, the printer does not operate,
displaying the error signal by LED.

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English