BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 54 -
Remarks:
■ GS ( L and GS ( 8 can be used for defining NV bit image.
■ When this command is entered, all NV bit images previously defined are removed from the NV memory.
■ After completion of this command, the printer executes a software reset to restore the settings as when turned on.
■ The NV bit image is printed by FS p.
■ During the execution of this command, paper feed button, LSB and real time functions will not operate.
• Bit image data and print result are as follows:
d1
dY+1
…
.
.
.
MSB
LSB
d2
dY+2
…
dk-2
MSB
LSB
.
.
.
.
.
.
…
dk-1
MSB
LSB
dY
dY x 2
…
dk
MSB
LSB
■ The capacity of NV memory area is 256KB.
Differences:
None

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English