BIXOLON SRP-332II Command Manual

SRP-330II/332II
Rev. 1.00 BIXOLON
- 96 -
GS /
Function:
Print downloaded bit image
Code:
ASCII
GS
/
m
Hex
1D
2F
m
Decimal
29
47
m
Range:
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
Default:
None
Description:
This command prints the downloaded bit image defined by GS * according to the mode denoted by m.
DPI : Dots per Inch (25.4mm)
m
Mode
Vertical dot density(DPI)
Horizontal dot density(DPI)
0, 48
Normal
180
180
1, 49
Double-width
180
90
2, 50
Double-height
90
180
3, 51
Quadruple
90
90
Remarks:
■ The download bit image is defined by GS *.
■ This command is ignored when if a downloaded bit image is not defined.
■ In standard mode, this command works only when the print buffer is empty and the printer is in the start of the
line. m is treated as normal data if the print buffer has data.
■ In page mode, the bit image data is accumulated in the print buffer, but does not perform the actual printing.
■ Except for character size and upside-down printing mode, none of print mode such as emphasized, double-strike, etc,
affects the printing of the downloaded bit image.
■ The default dot density set by GS L is applied to printing of the downloaded bit image.

BIXOLON SRP-332II Specifications

General

Brand	BIXOLON
Model	SRP-332II
Category	Printer
Language	English