BIXOLON SRP-350plusV Installation Guide



◈Information
Thisinstallationguidecontainsessentialinformationrequiredforproduct
installation.PleaserefertotheSoftwareontheDownloadsectionofthe
BIXOLONwebsite(http://www.bixolon.com)forfurtherinformation.

1.Manual:User’sManual,CodeTable,ControlCommands,Softwaremanuals
2.Driver:Windows,OPOS,CUPS(Linux,Mac),VCOM(USB,Ethernet)
3.SDK:UPOSSDK(iOS)
4.Utility:UnifiedPOSUtility,NetConfigurationTool,AndroidUtility,iOSUtility

BIXOLONmaintainsanongoingefforttoenhanceandupgradethefunctions
andqualityofallitsproducts.Infollowing,productspecificationsand/oruser
manualcontentmaybechangedwithoutpriornotice.
PleaserefertotheBIXOLONwebsitefortheaddressesandphonenumbersof
thecompany'sheadquartersandbranchoffices.

◈Components



SRP-350/352plusV


CableCover

USBA-BCable

Paper


AC/DCAdapter

PowerCord

DKGender

InstallationGuide


◈CableConnection
1.Turnofftheprinterandperipheraldevices.
2.Connectthepowercordtotheadapterandconnecttheadaptertothepower
supplyconnectoroftheprinter.
3.Checkthetypeoftheinterfacesatthebackoftheprinter(USB,Serial,
Parallel,Ethernet,PoweredUSB,WirelessLANandBluetooth)
andconnect
theinterfacecable.
4.Connectthedrawerkick-outcabletothedrawerkick-outportlocatedonthe
undersideoftheprinter.

Donotuseanadapterthatwasnotsuppliedwiththeprinter.





◈InstallingPaperRoll



1.PushtheCoverOpenButtontoopenthe
PrinterCover.
2.Insertnewrollpaperinthecorrect
direction.
3.Pullthepaperoutslightlyandclosethe
PrinterCover.



Whenclosingthecover,pressdownonthecenterofthecover
toensurethatthepaperisincontactwiththeroller.Printing
qualitymaynotbeoptimumifrecommendedpaperisnot
used.

◈UsingControlPanel


•Power(LED)
ThePowerLEDisonwhenevertheprinterison.
•Error(LED)
Redlightwillbeoninvariouserrorconditionssuchasoutof
paper,coveropen,etc
•Paper(LED)
RedLEDwillbelitwhenthepaperrollisrunninglow.
TheLEDkeepsblinkingwhentheprinterisinself-test
standbymodeormacroexecutionstandbymode.
•Feed(Button)
Pressthisbuttontofeedthepaperout.
Holddownthisbuttontofeedoutthepapercontinuously.

◈Self-Test
Theprinter’sfunctionalitycanbecheckedthroughtheself-test.Printing
quality,ROMversion,andmemoryswitchsettingscanbecheckedthroughthe
self-testfunction.

1.Checkwhetherpaperisinsertedcorrectly.
2.TurnonthepowerwhileholdingdowntheFeedbuttonandtheself-test
procedurewillbegin.
3.Theprinter
willprintoutdetailsofitscurrentstatusincludingwhichversion
ofROM.
4.Afterprintingoutitscurrentstatusofprinter,theprinterwillprintfollowing
linesandwaitforthenextstep(paperlightwillkeepblinking).
SELECTMODESBYPRESSINGFEEDBUTTON.
ContinuousSELF-TEST:Lessthan
1second
VMSMSelection:1secondormore
5.PresstheFeedbuttontoresumeprintingorholddownthebuttonforat
leastonesecondtochangetheVMSMsettings.
5-1If“Continuous“Self-Test”isselected
(1)PresstheFeedbuttonforlessthanonesecondtoprintthe
presetpage.
(2)Theselftestendsautomaticallyasitprintsthefollowinglineandcuts
thepaper.
***COMPLETED***
(3)Theprintergoesintonormalprintmodeuponcompletionoftheself
test.
5-2If“VMSMSelection”isselected
(1)Thefollowinglineswillbeprintedwhenthe
VMSMopens.
**VMSMSelection**
0:Exitandrebootprinter
1:Printcurrentsettings
2:SetPrintDensity
3:SetPrintSpeed
4:SetCuttingmode
5:BuzzerSetting
6:SetSerialSetting
(2)PresstheFeedbuttontoruntheabovefunction.

▶ Step1(SelectOptions):pressthebuttonanumberoftimesasshown
byeachmenu.
▶ Step2(EnterOptions):holddownthebuttonforatleastonesecond
toapplyeachitemselected.

Ifaselecteditemisnotlistedabove,thelistof“VMSMSelection”
willbeprintedagain.Settingthemodewillbecanceledifnoitem
isselectedinStep1.
If“0:Exitandrebootprinter”isnotexecuted,thenewsettings
willnotbesaved.

(3)HolddowntheFeedbuttonforatleast1secondtosavethechanges.
Thefollowinglinewillbeprintedbeforecuttingthepaper.

***COMPLETED***

6.Thenewsettingswillbeautomaticallyappliedwhenprinterresets.











PrinterInstallationGuide&SafetyGuide
KN04-00241A(V1.0)
THERMALPRINTERSRP-350/352plusV
PowerCord
Ethernet
Cable
InterfaceCable
(Serial/Parallel/PoweredUSB/
WirelessLAN/Bluetooth)
Adapter
DrawerKick-out
Port
PowerCable
Interfaceport
USB
Cable
DrawerKick-out
Cable
EthernetPort
USBPort
PowerPort

BIXOLON SRP-350plusV Specifications

General

Type	POS printer
Color	No
Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Black
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 / 60 Hz
Maximum roll diameter	79.5 mm
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	10 - 80 %
Mobile operating systems supported	Android, iOS
Windows operating systems supported	Yes
Serial interface	-
Optional connectivity	Bluetooth, Ethernet, USB 2.0, Wireless LAN
USB 2.0 ports quantity	1
Connectivity technology	Wired
Internal memory	- MB
Autocutter durability	2 million cuts

Weight and Dimensions

Depth	200 mm
Width	145 mm
Height	146 mm