BIXOLON SRP-350V Command Manual

Thermal POS Printer
Ver. 1.00 BIXOLON
- 117 -
BS V
Function :
Select cut mode and cut paper
Code :
①
ASCII
BS
V
m
Hex
08
56
m
Decimal
08
86
m
②
ASCII
BS
V
m
n
Hex
08
56
m
n
Decimal
08
86
m
n
Range:
① m=0, 1, 48, 49 ② m=65, 66, 0 ≤ n ≤ 255
Default:
None
Description :
This command cuts paper in the specified mode as follows.
Remarks :
For ①
■ If an auto cutter is not provided, this command is ignored command is executed.
For ②
■ When n = 0, the mechanism feeds the paper to the cutting position and cuts it.
■ If an auto cutter is not provided, the mechanism only feeds the paper for specified amount.
■ Vertical motion unit is used for calculating a paper feed amount.
m
Function
①
0,48
Executes a partial cut (one point left uncut)
1,49
Executes a full cut (cuts the paper completely)
②
65
Feeds paper to (cutting position + n × vertical motion unit) and executes a partial cut (one point left uncut)
66
Feeds paper to (cutting position + n × vertical motion unit) and executes a full cut
(cuts the paper completely)
Differences:
None

BIXOLON SRP-350V Specifications

General

Brand	BIXOLON
Model	SRP-350V
Category	Printer
Language	English