BIXOLON SRP-E302 Command Manual

SRP-E300/302
Ver. 1.01 BIXOLON
- 103 -
Differences:
■ The printer ID is shown according to printer models as follows:
Printer ID
SRP-E300/302
1(Printer model ID)
0x20
2(Type ID)
Type ID varies depending on functions the printer supports as follows:
- 0x01 (Multi-byte character)
- 0x02 (Autocutter)
- 0x03 (Autocutter + Multi-byte character)
3(Printer feature ID)
0x63(when 3inch),0x62(when 2inch)
65(Firmware Version)
Depend on firmware version information
66(Manufacturer)
BIXOLON
67(Printer model)
SRP-E300 or SRP-E302
69(Language of Font)
Code page currently being used. Refer to cod page setting command, ESC t.

BIXOLON SRP-E302 Specifications

General

Brand	BIXOLON
Model	SRP-E302
Category	Printer
Language	English