BIXOLON SRP-E302 - Page 111

SRP-E300/302
Ver. 1.01 BIXOLON
- 111 -
GS f
Function:
Select font for HRI characters
Code:
ASCII
GS
f
n
Hex
1D
66
n
Decimal
29
102
n
Range:
n = 0, 1, 48, 49
Default:
n = 0
Description:
This command selects a font for the HRI(Human Readable Interpretation) characters used when printing a bar code,
using n as follows:
n
Font
0, 48
Font A
1, 49
Font B
Remarks:
■ The setting of this command is applied to only HRI characters.
■ The printing position of HRI characters are specified by GS H.
■ The configurations of Font A and B vary depending on the printer model.
Differences:
None