BIXOLON SRP-E302 - Page 112

SRP-E300/302
Ver. 1.01 BIXOLON
- 112 -
GS h
Function:
Selects bar code height
Code:
ASCII
GS
h
n
Hex
1D
68
n
Decimal
29
104
n
Range:
1 ≤ n ≤ 255
Default:
n = 162
Description:
This command sets the height of the bar code to n dots.
Remarks:
■ The unit of n depends on the printer model.
■ The setting of this command remains effective until ESC @, printer reset or power cycling is executed.
Differences:
Unit of one dot:
■ SRP-E300 : 0.141mm(1/180 inch)
■ SRP-E302 : 0.125mm(1/203 inch)