BIXOLON SRP-E302 - Page 23

SRP-E300/302
Ver. 1.01 BIXOLON
- 23 -
ESC –
Function:
Turn underline mode on/off
Code:
ASCII
ESC
-
n
Hex
1B
2D
n
Decimal
27
45
n
Range:
0 ≤ n ≤ 2, 48 ≤ n ≤ 50
Default:
n = 0
Description:
■ This command enables the print data following it to be printer out underlined.
• The underline mode varied depending on the following values of n:
n
Function
0,48
Turns off underline mode
1,49
Turns on underline mode, set at 1-dot thick
2,50
Turns on underline mode, set at 2-dot thick
Remarks:
■ The spaces generated by horizontal tab are not underlined.
■ Using bit 7 of ESC !, the underline mode can be activated/deactivated as well.
Differences:
None