BIXOLON SRP-E302 Command Manual

SRP-E300/302
Ver. 1.01 BIXOLON
- 24 -
ESC 2
Function:
Select default line spacing
Code:
ASCII
ESC
2
Hex
1B
32
Decimal
27
50
Range:
None
Default:
None
Description:
This command sets the default line spacing The default line spacing is approximately 3.75 mm, which is equivalent to
30 dots.
Remarks:
■ The line spacing can be set independently in standard mode and in page mode.
■ The setting of this command remains effective until ESC !, ESC @, printer reset or power cycling is executed.
Differences:
Default line spacing:
■ SRP-E300 : 4.23 mm (30 dots)
■ SRP-E302 : 3.75 mm (30 dots)

BIXOLON SRP-E302 Specifications

General

Brand	BIXOLON
Model	SRP-E302
Category	Printer
Language	English