BIXOLON SRP-E302 Command Manual

SRP-E300/302
Ver. 1.01 BIXOLON
- 94 -
<Function 581> GS ( k pL pH cn fn m (fn=81)
Code:
ASCII
GS
(
k
pL
pH
cn
fn
m
Hex
1D
28
6B
03
00
3D
51
m
Decimal
29
40
107
3
0
61
81
m
Range:
pL + pH x 256) = 3 (pL=3, pH=0)
cn=61
fn=81
m=48
Default:
None
Description:
This command encodes and prints DATAMATRIX symbol data saved in the storage area.
Remarks:
■ In standard mode, this command is available only when printer is at the beginning of a line or the printer buffer is
empty.
■ A symbol exceeding the printing area in size can not be printed.
■ Printing operation is not processed under the following conditions:
• There is no data. (Function 580 cannot be executed)
• The number of alphanumeric characters exceeds 2334.
• The number of 8bit byte characters exceeds 1558.
• The number of numeric characters exceeds 3116.
■ DATAMATRIX uses ECC 200 symbols.
■ For error correction codeword, the Reed-Solomon algorithm is employed.
■ The following data is automatically added during the encoding process:
• Position pattern
• Error correction code text
• Mode separator
• Pad code text

BIXOLON SRP-E302 Specifications

General

Brand	BIXOLON
Model	SRP-E302
Category	Printer
Language	English