BIXOLON SRP-F310II Command Manual

SRP-F310/F312/F313II
GS V
Function :
Select cut mode and cut paper
Code :
①
ASCII
GS
V
m
Hex
1D
56
m
Decimal
29
86
m
②
ASCII
GS
V
m
n
Hex
1D
56
m
n
Decimal
29
86
m
n
Range :
①
m=0, 1, 48, 49
②
m=65, 66, 0 ≤ n ≤ 255
Default :
None
Description :
■
This command cuts paper in the specified mode as follows.
m
Function
①
0,48
Executes a partial cut (one point left uncut)
1,49
②
65
Feeds paper to (cutting position + n × vertical motion unit) and
executes a partial cut(one point left uncut)
Remarks :
For
①
■ If an auto cutter is not provided, this command is ignored command is executed.
For ②
■ When n = 0, the printer feeds the paper to the cutting position and cuts it.
■ If an auto cutter is not provided, the printer only feeds the paper for specified amount.
■ Vertical motion unit is used for calculating a paper feed amount.
■
Cutting mode is changed only by setting MSW5-1.
Differences :
None
Rev. 1.00 BIXOLON
- 100 -

BIXOLON SRP-F310II Specifications

General

Brand	BIXOLON
Model	SRP-F310II
Category	Printer
Language	English