BIXOLON SRP-F310II Command Manual

SRP-F310/F312/F313II
ESC %
Function :
Select/cancel user-defined character set
Code :
ASCII
ESC
%
n
Hex
1B
25
n
Decimal
27
37
n
Range :
0 ≤ n ≤ 255
Default :
n = 0
Description :
■
This command selects/deselects user-defined character set that is downloaded by user.
To make it valid, the least significant bit should be defined like following.
• When n=0, the user-defined character set is deselected.
• When n=1, the user-defined character set is selected.
Remarks :
The resident character set is enabled and used right after canceling the user defined character set.
Differences :
None
Rev. 1.00 BIXOLON
- 19 -

BIXOLON SRP-F310II Specifications

General

Brand	BIXOLON
Model	SRP-F310II
Category	Printer
Language	English