Operating Manual A400 / A400FB
Device installation
2--1
6.054.98.5.10.04
2 Device installation
The machine has to be transported and stored in accordance with the symbols on the
packaging.
Follow the instructions on how to unpack 6.054.49.106.00.
2.1 Assembling the work table
Assembly, start--up and instruction is carried out for the first time by the responsible BIZERBA
customer services office or the BIZERBA trade consultant.
Please take not of operating criteria.
Pay attention to the mounting surface and the space requirements (Chapter 1.4)
Requirements for mounting surface:
-- horizontal and flat
-- anti--tilt and anti--slip
-- stable and rigid (weight approx. 109 kg / 116 kg)
_______________________________________________________________________
Important note!
For the stability of the machine when using a desk--top
mounting, it is of absolute necessity that the installation surface
is secured according to the attached drawing.
Drawings and individual parts are found in the machine accessory
bag.
_______________________________________________________________________
2.2 Assembly on mobile bench
Assembly, start--up and instruction is carried out for the first time by the responsible
BIZERBA customer services office or the BIZERBA trade consultant.
Please take not of operating criteria.
Installation surface and required space (chapter 1.4)
Requirements for mounting surface:
-- horizontal and flat
-- anti--slip and secure
_______________________________________________________________________
Important note!
To ensure the stability of the machine with a mobile bench, it is
of absolute necessity that it is secured on the installation
surface in accordance with the attached drawing.
Drawings and individual parts are found in the bench--packaging
accessories bag.
_______________________________________________________________________
To Next Page
Loading...
