Operating Manual A400 / A400FB
General
1--1
6.054.98.5.10.04
1 General
1.1 Warranty information
_______________________________________________________________________
CAUTION This information is a prerequisite that must be fulfilled before
commissioning and during operation of our equipment in order
to guarantee reliable and fault--free operation.
_______________________________________________________________________
If you should have any questions in connection with the practical application of these
conditions, please contact us or the responsible Customer Service Agent.
-- Units should be stored and transported onl y in the original packaging until they are
installed.
-- Do not install or put into operation before the conditions are satisfied.
-- The installation surface must be horizontal, level, stable, anti--tilt and anti--slip.
Good accessibility and technical operating aspects must be taken into account.
-- The initial installation and commissioning as well as instruction in the operation, cleaning,
care and maintenance will be carried out by the responsible BIZERBA Customer Service
Agent or the BIZERBA specialist adviser.
-- The hardware and software required for a data dialogue between BIZERBA equipment
and equipment provided by others must be clarified with us in writing.
-- The supervisory and operating personnel must familiarize themselves thoroughly with the
instructions in this operator manual.
-- Only trained personnel may work with this machine. Extra training must be repeated if
necessary.
-- We cannot accept any liability in the event of unauthorized installation and unauthorized
electrical installation, incorrect operation, improper use, structural modifications, removal
of protective equipment, failure to use genuine BIZERBA spare parts and accessories or
the use of third party operating material.
-- In such cases, the user is acting at his own r isk and must take responsibility himself for any
damage incurred.
-- For this reason, use only genuine BIZERBA spare parts and accessories.
-- We cannot accept any warranty or liability claims for natural wear and tear.
The diagrammatic representation of the machine may differ from that supplied due to
country--specific regulations and as a result of technical progress.
This does not affect the content of the operating instructions.
To Next Page
Loading...
