Bizerba A400 - Page 4

Operating Manual A400 / A400FB
Contents
6.054.98.5.10.04
0--2
Page
5 Cleaning 5 -- 1................................................
5.1 Cleaning preparation 5 -- 1......................................
5.2 Cleaning 5 -- 7.................................................
5.3 Slicer cleaning plan 5 -- 8........................................
5.4 Preparing the machine for operation 5 -- 10.........................
6 Sharpening the knife 6 -- 1....................................
6.1 Sharpening device 6 -- 1........................................
6.2 Preparing the sharpening process 6 -- 1...........................
6.3 Sharpening 6 -- 3...............................................
6.4 Honing process 6 -- 3...........................................
6.5 Remove sharpening device. 6 -- 4................................
6.6 Remove grinding dust 6 -- 4.....................................
7 Servicing/ Maintenance 7 -- 1..................................
8Faults 7--1..................................................
9 Special accessories 7 -- 2.....................................
10 Operating conditions 8 -- 1....................................
10.1 EC Directives/Norms and Recommendations 8 -- 1.................
10.2 Mains power supply 8 -- 1.......................................
10.3 Air convection 8 -- 2............................................
10.4 Limiting values for protection category, temperature and humidity 8 -- 2
Annex 9 -- 1..................................................
Set programs
Declaration of conformity A400
Declaration of conformity A400FB