Presettings for labeling
Operating instructions GLP
3 -- 17
6.562.98.5.01.18
3.1.4.4 Print weight
Printing weight unit on single labels
Whether or not the weight unit is to be printed out on labels in addition to the weight
may be preset here.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Weight Print
weight
Unit of
weight
Call up the selection menu.
Without
Make this setting if the weight is to be printed without a weight unit.
With
Make this setting if the weight is to be printed on labels with a
weight unit (standard setting).
With
blank
Make this setting if a blank is to appear between the weight and the
weight unit.
Weight unit on single labels
without weight unit with weight unit
with weight unit
and blank
Printing weight unit on total labels
Whether or not the weight unit is to be printed out on total labels in addition to the
weight total may be preset here.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
Article
data
Weight Print
weight
Unit of
weight
Wgt. unit
for tot.
--
Call up selection menu.
Without
Make this setting if the total weight is to be printed without a weight
unit.
With
(normal)
Make this setting if the total weight is to be printed with a weight unit
(standard setting).
With
(rotat.)
Make this setting if the total weight is to be printed with the weight
unit turned by 90 degrees.
Weight unit on totals labels
3
without
with (normal) with (rotated)
To Next Page
Loading...
