Bizerba GLP 80 - Page 156

Presettings for labeling
Operating instructions GLP
3 -- 18
6.562.98.5.01.18
Printing e-symbol
Whether and where the e--symbol is to be printed out may be preset here.
According to the prepackaging regulation the e--symbol is the international sym-
bol for a preset nominal filling quantity of a prepack.
Depending on the label configuration and in case if fixed weight and fixed value
labeling the e-- symbol may be printed in the unit price field on Bizerba standard
labels and in the pre--defined unit price field on customer labels.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Weight Print
weight
-- Call up the selection menu.
’e’ print
UP
’e’
.. field
Set ”e” if no e--symbol is to be printed on standard labels, or if the
e--symbol is to be printed on a customer label in a field especially
created for this purpose (standard).
Set UP(=0) if the e--symbol is to be printed on standard labels in
the unit price field. This is only possible if labeling is done without
unit price or if the unit price = 0.
e--symbol on a
standard label
Prerequisite:
labeling mode preset wi-
thout unit price or with the
unit price = 0.
Height of printed weight 6mm or 4 mm for standard labels
Whether or not the weight is to be printed on Bizerba standard labels of 68 mm
and 37 mm or on ISB 68 mm label with 4mm or 6mm character height may be
preset here.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
Weight Print
weight
-- Call up the selection menu.
6 mm wgt
only
+
--
Select ”with(+)” if the weight is to be printed on labels with 6 mm
in lieu of 4 mm character height. The height preset applies only to
Bizerba standard labels of 68mm and 37 mm and to 68 mm ISB
labels.
3