Bizerba GLP 80 - Page 174

Presettings for labeling
Operating instructions GLP
3 -- 36
6.562.98.5.01.18
3.1.10 Country 2nd currency (secondary country)
A selection of a different secondary country is only possible if a relevant
activation is made at mode level 5.
In dual currency price labeling, the relevant country for the 2nd currency is preset
(fixed) either at mode level 5 or per PLU under the PLU data. If labeling is to be
carried out temporarily for another country, the relevant secondary country may
be selected here. An overview of the selectable countries is given in section 2.1
of the programming instructions. After presetting of the country, the relevant cur-
rency unit is printed on labels together with the 2nd unit price and selling price.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Article
data
[ETC]
Country
2nd cur.
-- Call up the selection menu.
[ ] , [ ] -- Select the country using the cursor keys ...
E -- or select the country by entering the initial letter, e. g. E for EU.
In the event that several countries start with the same initial let-
ter, press the letter key until the required country is inversely
presented.
OK <ENTER>
Cancel <ESC>
Country 2nd. cur.
EU
Ireland
England
[ENTER] -- Acknowledge the selection and exit the selection menu.
The set country is inversely presented above the softkey.
3
Country
EU
2nd curr.