Presettings for labeling
Operating instructions GLP
3 -- 37
6.562.98.5.01.18
3.2 Texts
Various input tools are available for entering or changing the texts to be printed
on the labels, depending on the type of text:
General texts 1--20
The PLU texts saved under the PLU data are usually printed in the field of text 1--3
(see below). If required, they can also be entered directly or those texts called up
with the PLU data changed. Texts 4--20 are only available on customer labels.
Date texts
The variable date texts for date 1 and 2 in mode level 2 can be entered directly or
those date texts called up with the PLU data changed if required.
Simple texts 1--10
Other texts often have to be printed on customer labels, so these can be entered
with the appropriate label configuration directly in mode level 1 or 2 (max. 15 cha-
racters).
Static texts
If the same texts are to be printed on customer labels, up to 50 texts per text table
can be entered in mode level 3 or 4 and saved under text parameter numbers. The
static texts table number can be assigned to the PLU data and the texts called up
this way. The static texts can also be called up in mode level 1 or 2 and changed
temporarily.
PLU text
In softkey “PLU text” the text of the database attribute “PLU text” is displayed. This
text may be modified for printing on customer labels.
3.2.1 General texts 1--20
Texts 1--3 can be printed on the standard labels and texts 1--20 on the customer
labels, with the appropriate configuration. To do this, they are usually entered in
mode level 3 or 4 with a text editor, and saved under text numbers. The texts are
then assigned to the appropriate article via the text number under the PLU data.
At a PLU call the texts are then also automatically called and printed on the labels.
Texts 1--20 can also be entered as general texts 1--20 directly in mode level 1
or 2 or those texts called up with the PLU data changed if necessary and saved
under the previous or a new text number in the database. Text entry with the text
editor is described in detail in the programming instructions in Chap. 2.2, Texts.
Fixed text assignment on standard labels:
3
Special offer
Text 1
Text 2
Text 3
e. g. company logo
e. g. article and/or ingredient text
Special texts for printout only
on labels with configured
additional text field
To Next Page
Loading...
