Bizerba GLP 80 - Page 188

Presettings for labeling
Operating instructions GLP
3 -- 50
6.562.98.5.01.18
3.3.5.5 Selecting the time
Print of Time 1
If the time 1 (packing time) is to be printed on the customer labels instead of
date 1, it can be preset here accordingly. If required, time 1 can also be preset
manually (see section 3.3.4.6, page 3 -- 46).
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Print
date/time
Select
time
-- Call up the selection menu.
Print of
Time 1
--
+
Set if time 1 is to be printed or not.
Print of Time 2
If the time 2 (sell--by time) is to be printed on the customer labels instead of
date 2, it can be preset here accordingly. If required, time 2 can also be preset
manually (see section 3.3.4.7, page 3 -- 46).
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Print
date/time
Select
time
-- Call up the selection menu.
Print of
Time 2
-- +
Set if time 2 is to be printed or not.
3.3.5.6 Printing the year with 2 or 4 digits
The year of the packing and best before date may be printed with either 2 or 4 digits.
Example: date with 2-digit year 14.07.05
date with 4-digit year 14.07.2005
Depending on the label type and size the 4--digit year may be printed out in diffe-
rent font sizes to cope with the space available.
For reasons of space, the year may be indicated on the GT 240 display above
the softkeys with 2 digits.
Operating sequence: Description
------------------------------------------------------------------------------------------------------------------------------------------------------
[MODE] 2
Date Print
date/time
-- Call up the selection menu.
printout
year
2-di
4-di Print the year with 2 digits or switch to 4 digits.
Standard setting : 2--digit
Label example:
3
4-digit year