Operating conditions
Operating instructions GLP
1 -- 2
6.562.98.5.01.18
1.1.4 Proper use
The labeler and the scale must only be used for labeling packed goods or food.
No unpacked food must be labeled!
1.1.5 Requirements on operation staff
The operation staff must be instructed accordingly before operating the device.
Please use the available operating instructions to do so.
The operating instructions come with every device and must be stored close to
the device and easily accessible to everybody.
Only operation staff who have been instructed properly are permitted to operate
the device!
Please make sure that the operation staff have the minimum age by law.
Before starting operating the labelers GLP--PRIMA and GLP--COMPACT at the
packaging machines the operation staff must be referred to the “Safety instruc-
tions for automatic labelers”, as described in section 1.1.8 on the following pa-
ge.
1.1.6 Area of use
The labeler must only be used in industrial and commercial areas.
The labeler must not be used in a potentionally explosive area.
1.1.7 Notes concerning the operation of moveable or mobile labelers
When moving the device to another position, the following sequence should be
strictly observed:
1 Switch off the device.
2 Disconnect all communication and supply cables.
Before resetting the device into service, proceed as follows:
1 Reconnect all communication and supply cables.
2 Switch on the device.
1.1
To Next Page
Loading...
