Presettings
Operating instructions GLP
3 -- 93
6.562.98.5.01.18
Activating statistics by selecting statistics type
Only possible with STATISTICS license module!
If the weights of the checked packages are to be subjected to a statistical evalua-
tion, the statistics function must be activated in the weight class column with the
preset nominal weight Qn.
or [ ] -- Select the table column with the nominal weight Qn.
or [SELECT] -- Open the table field “Labeling mode”.
or [ ] -- Select the table field ’Statistics’.
or [SELECT] -- Activate the statistics selection.
Fixed value
Weight:
Statistics
200 g
0 g
without
for USA
to FPV Germany
Factor To(1..30):
Min level:
Max. level:
Labeling mode
0 g
[ ] [ ] -- Select required statistics type (see below for statistics type)
[ENTER] [ENTER] --Confirm selected statistics type
Description of statistics cards
without:: There is no statistics evaluation!
to FPV Germany (Finished Pack Decree):
With this preset all packs of the preset weight range are monitored depending on
the preset nominated weight Qn in accordance with the legal requirements of the
Finished Pack Decree FPV and a statistical evaluation created thereon. After
selecting the preset ”as per FPV” then, depending on the nominal weight Qn, the
tolerance limits TU2, TU2 and TO--max are displayed (if no upper limit is entered).
The ’Factor To(1..30)’, can be increased (standard = 3) in order to obtain a
greater proportion of accepted packs above the nominal weight Qn. With the di-
rect entry of an upper limit no upper limit change is possible.
USA -- Non USDA standardized: Valid for all non--meat and poultry products.
The tolerance limits TU1 and TOmax are calculated and displayed according to
the guidelines of the Handbook 133. Accepted are all packages with a statistical
mean value equal or larger than the preset nominal weight. There is only the lower
tolerance limit TU1.
USA -- USDA standardized: Valid for all meat and poultry products.
Otherwise information are valid listed under “USA -- Non USDA standardized”.
USA -- USDA only liquid materials: Valid for all non--meat and poultry pro-
ducts in liquid form, e.g. baby food.
Otherwise information are valid listed under “USA -- Non USDA standardized”.
3
To Next Page
Loading...
