Presettings
Operating instructions GLP
3 -- 158
6.562.98.5.01.18
B) Select respective subject text from text number
list:
Press softkey “Text number”. The stored text numbers are dis-
played together with the corresponding texts.
Text number
Text number
1000
Text
1001
Motor defective
Call customer service
[ ] -- Select respective text
, e.g. text number 1000.
[ENTER] [ENTER] -- Display respective subject text in the editor
C) Select respective subject text from text list
-- Press the softkey “Text”. The texts stored are displayed with
the corresponding text numbers.
[ ] -- Select respective text.
[ENTER] [ENTER] -- Display respective subject text in the editor.
The subject text stored via text name or text number is displayed in the editor and
the text number in the upper status line. The subject text can also be modified in
the text editor before storing, if necessary.
-- Press softkey “Continue”.
Save entered or called up text.
Enter e--mail text
The input editor for the e--mail text is shown then.
ContinueLoad
0
Cancel
xxxxxxxxx -- Enter respective e--mail text via the alphanumeric keyboard....
Load e--mail text
Load
0
-- or call up function load e--mail text.
0
Cancel
Text
number
Text
OK
Load: Text
Text number
There are 3 possibilities to call up stored e--mail texts:
A) Load respective e--mail text via its text number:
xxx [ENTER] -- Enter respective text number and confirm.
3.1
Text
number
Text
Continue
To Next Page
Loading...
