Bizerba GLP 80 - Page 332

Notes
Operating instructions GLP
6.562.98.5.01.18
4 -- 24
4.3.7 Dead weight
GLP 80 11 kg
GLP 160 15 kg
GT 240 0,950 kg
4.3.8 Display data GT 240
LC dot matrix display with additional display backlighting
Number of pixels 240 x 64 (w x h)
Pixel size 0.48 mm (0.01”)
Display size 0.53 mm (0.01”)
Display size 127,15 x 33.87 mm (5.00 x 1.33”)
Black dots may appear when operating the unit at high ambient temperatures
(above the operating temperature range specified by the manufacturer). This ef-
fect is caused by the technology of the liquid crystal display. The black dots disap-
pear with decreasing ambient temperature.
4.3.9 Display data GT--CT (Option)
LC display with additional display backlighting
Design LCD, monochrome
Pixel spacing 10,4 “
Resolution VGA resolution 640 x 240
4.3.10 Printer data
Print method: direct thermal or thermal transfer printing
GLP 80 GLP 160
Resolution 8 dots/mm
Option: 12 dots/mm
8 dots/mm
Option: 12 dots/mm
Print width Standard
56 mm, 448 dots,
2 inches
Option
80 mm, 640 dots,
3 inches
Standard: 80 mm,
640 dots, 3 inches
Option: 104 mm,
832 dots, 4 inches
Option: 160 mm, 1344 dots,
6 inches
Print rate 250 mm/second 250 mm/second
Print direction: 0, 90, 180, 270 degrees
Fonts: 30 character sizes
4.3