Options
Operating instructions GLP
5 -- 10
6.562.98.5.01.18
5.5.3 Setting EPSON--FX 80 compatible printers
For list printing, an EPSON--FX compatible printer or an EPSON--LX 300 may be
used.
The following printer settings are related to an OKI--520 printer. The significance
of the settings is described in the printer manual.
Printer Control Emulation mode EPSON FX
Font Print mode Utility
Pitch 10 CPI
Proportional spacing No
Style Normal
Size Single
Symbol Set Character set Set II
Language set ASCII
Zero character Unslashed
Code page USA
Slashed letter O No
Rear Feed Line spacing 6 LPI
Form tear--Off Off
Skip over perforation No
Page length 12’
Gap control Auto Gap
Bottom Feed Line spacing 6 LPI
Form tear--off Off
Skip over perforation No
Page length 12’
Gap control Auto gap
Top Feed Line spacing 6 LPI
Bottom margin Valid
Page length 12’
Gap control Auto gap
Page length control by MENU setting
Wait time 1 sec.
Set--Up Graphics Bidirectional
Receive buffer size 64K
Paper out override No
Print registration 0
Operator panel emulation Full operation
Reset inhibit No
5
To Next Page
Loading...
