Installation and commissioning
Operating instructions GLP
1 -- 21
6.562.98.5.01.18
1.3.8 Labeler GLP connected to the packaging machine
1.3.8.1 Installation instructions
The installation and connection of the packaging machine, and the briefing of ope-
rating personnel is carried out by the packaging machine manufacturer”s service
department, or a representative appointed by him.
Install the packaging machine in such a manner as to ensure easy access for ope-
ration, maintenance and cleaning.
The packaging machine can be installed with its back to the wall.
Packaging machine:
Front side: Working area of the operator. This area has to be comple-
tely free for feeding and removing trays.
Left side: A clearance of at least 1 m should be available for changing
film rolls.
Right side: A clearance of at least 1 m should be available for cleaning
and maintenance purposes.
If necessary provide for enough space for an additional
conveyor belt or roller conveyor for further transportation of
wrapped trays.
min. 1m
min. 1m
GLP 80
1.3.8.2 Installing and connecting the labeler and scale
The installation and connection of the packaging machine and the scale, as well
as the appropriate briefing of operating personnel is carried out by trained Bizerba
specialist personnel.
1.3
To Next Page
Loading...
