9.4 TEST EQUIPMENT REQUIREMENTS
(only required when doing a performance verification test)
The following instruments will be required to test the complete installa-
tion of the unit.
1). A 4½ Digit Multimeter for verifying the output voltage and current.
2). A 20 MHz dual channel oscilloscope for verifying the Ripple in the DC
Output/s.
3). A Resistive load to suit the maximum output current from the unit de-
pending on the model and capacity.
4). A Standard calibrated current shunt to measure the output current.
15
To Next Page
Loading...
Need help?
General
