Need help?Do you have a question about the BK Precision 1688B and is the answer not in the manual?
General| Ripple and Noise (CC) | < 3 mArms |
|---|---|
| Display | LED |
| Input Voltage | 100-240VAC, 50/60Hz |
| Display Type | LED |
| Operating Temperature Range | 0°C to 40°C |
| Storage Temperature Range | -20°C to 70°C |
| Power Requirements | 110/220 VAC ±10%, 50/60 Hz |
| Load Regulation | 0.01% + 3 mV |
| Line Regulation | 0.01% + 3 mV |
| Voltage Regulation | 0.01% + 3 mV |
Essential safety guidelines for instrument operation and maintenance.
Highlights key capabilities and design aspects of the 1685B Series power supplies.
Details the layout and functions of the front panel controls and the LED display.
Describes the rear panel terminals, switches, and ports for connections and operation.
Step-by-step guide for connecting, powering on, operating, and configuring the power supply.
Explains the different operating modes: Normal, Preset, Remote Control, and Set.
Details how to set up and use analog remote control for voltage and current adjustment.
Information on controlling the power supply via PC software and commands.
Explains OVP feature, warning display, and reset procedure.
Describes OTP feature, warning display, and troubleshooting steps.
Explains OLP feature, its relation to CC mode, and warning display.
Details the Upper Voltage Limit (UVL) and Upper Current Limit (UCL) settings.
Instructions for replacing blown fuses, including fuse types and locations.
Lists directives and standards the power supply complies with.
Outlines the process for obtaining warranty service and returning the product.
Details the process for non-warranty repairs and associated payment methods.
Specifies conditions under which the warranty is void and limitations on liability.
To Next Page