CONTENTS
1. PRODUCT DESCRIPTION
1-1. Introduction ------------------------------------------------------ ( 4 )
1-2. Technical Specifications -------------------------------------- ( 5 )
1-3. Equipment Ratings --------------------------------------------- ( 8 )
1-4. Supplied Accessories ------------------------------------------ ( 8 )
2. INSTALLATION
2-1. Initial Inspection ------------------------------------------------- ( 9 )
2-2. Connecting AC Power ----------------------------------------- ( 9 )
2-3. Cooling and Ventilation ---------------------------------------- ( 9 )
2-4. Position ------------------------------------------------------------ ( 9 )
2-5. Warming-Up ------------------------------------------------------ ( 9 )
3. OPERATION
3-1. Controls, indicators and connectors ------------------------ (11)
3-2. Operating instruction ------------------------------------------- (14)
3-3. Frequency Measurements ------------------------------------- (14)
3-4. Period Measurements ------------------------------------------ (15)
3-5. Total Measurements -------------------------------------------- (15)
3-6. Time interval measurement(A-B)----------------------------- (16)
3-7. Ratio Measurement (A/B)-------------------------------------- (17)
3-8. Use of RS-232C Serial Interfacing-------------------------- (18)
4. MAINTENANCE
4-1. Fuse Replacement ---------------------------------------------- (19)
4-2. Adjustment and Calibration ----------------------------------- (19)
4-3. Cleaning and decontamination ------------------------------- (19)
5. OTHERS
5-1. BNC Cable Considerations ----------------------------------- (20)
5-2. Use of Attenuator probes ------------------------------------- (20)
5-3. Line Frequency Measurements ------------------------------ (21)
To Next Page
Loading...