Need help?Do you have a question about the BK Precision 1823a and is the answer not in the manual?
General| Brand | BK Precision |
|---|---|
| Model | 1823a |
| Category | Cash Counter |
| Language | English |
Overview of the reciprocal UNIVERSAL COUNTER series and its features.
Detailed specifications for the instrument, covering input characteristics, resolution, and accuracy.
Specifies frequency range, sensitivity, coupling, impedance, and attenuator settings for Input A.
Details the resolution and number of displayed digits based on gate time and input selection.
Provides accuracy specifications for frequency and period measurements.
Graph showing maximum input voltage limits across different frequencies for the instrument.
Specifications for measuring time interval between input A and input B signals.
Specifications for measuring the frequency ratio between input A and input B.
Details specifications for Input C, including frequency range, sensitivity, and impedance.
Outlines the characteristics of the instrument's time base, including frequency and stability.
Defines the available gate time settings and their impact on measurement resolution.
Provides the physical dimensions and weight of the instrument.
Lists required input voltages, fuses, and maximum power consumption for the instrument.
Specifies recommended temperature and humidity for optimal instrument operation.
Procedure for inspecting the instrument for damage and checking supplied accessories.
Instructions for connecting the instrument to AC power, including voltage selection.
Guidance on cooling and ventilation requirements for the instrument.
Information on the instrument's bench-type design and tilt stand adjustment.
Recommended warm-up time for the instrument to stabilize before use.
Identification and description of the front panel controls, indicators, and connectors.
Basic operating steps for using the frequency counter.
Procedures for performing frequency measurements using inputs A, B, and C.
Procedure for measuring the period of a signal using input A.
How to use the totalize mode to count events over a specific time period.
Procedure for measuring the elapsed time between selected edges of input A and B signals.
Procedure for measuring the ratio of frequency applied to input A to input B.
Information on hardware/software requirements and output data formats for RS-232C communication.
Step-by-step instructions for safely replacing the fuse.
Recommendation for regular adjustment and calibration by qualified personnel.
Guidelines for cleaning the instrument using a soft cloth and clean air.
Factors affecting measurement accuracy related to BNC cable connections and termination.
Guidance on using attenuator probes with input A for reduced circuit loading.
Advice on using attenuator and filters for accurate line frequency measurements.
To Next Page