To Next PageTo Next Page
Need help?Do you have a question about the BK Precision 4017 and is the answer not in the manual?
General| Frequency | 60 Hz |
|---|---|
| Total Harmonic Distortion | Less than 5% |
| Output Voltage | 120 V AC |
| Engine Type | 2-stroke, single cylinder |
| Starting System | Recoil start |
| Noise Level | 68 dB at 23 feet |
Key safety measures for operating test equipment safely, including handling high voltage and grounding.
Additional safety advice on hot chassis, grounding, and prohibited applications.
Details frequency range, resolution, duty cycle, waveform types, and symmetry.
Covers output impedance, level, attenuation, DC offset, and VCG input parameters.
Details sweep operation, frequency counter, power source, dimensions, weight, and accessories.
Detailed description of front panel controls and their functions, including switches and knobs.
Explains indicators like GATE LED, Hz/KHz LED and provides a labeled front panel diagram.
How to select frequency, waveform type (Sine, Square, Triangle), and amplitude.
Adding DC offset, considerations for frequency control, and output limitations.
Adjusting waveform symmetry and duty cycle for pulse and ramp generation.
Using TTL/CMOS output, setting up linear/log sweep, and sweep width control.
Operating as VCG, protecting the output from damage, and matching DC levels.
Information on the B+K Precision "Guidebook to Function Generators" for applications.
Instructions on selecting the correct AC voltage and replacing fuses.
Information on obtaining repair and calibration services from authorized agencies.
Guidelines for returning products for warranty and non-warranty repair services.
