To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BBC30 and is the answer not in the manual?
Power| input voltage | 120 or 220V AC |
|---|---|
| input frequency | 50 or 60Hz |
| input power | 550W continuous |
| engine start power | 1500 watts |
Output| output voltage | 12 volts DC |
|---|---|
| output current | 2/10/30 amps continuous |
| engine start current | 80 amps |
Introduces the manual for the BBC30 model, highlighting its purpose and product details.
Emphasizes reading all instructions before operating the product to prevent injury.
Covers avoiding wet locations, proper cord use, GFCI, and checking damaged parts.
Details proper dress, safety equipment, avoiding overreaching, and staying alert during use.
Explains DANGER, WARNING, and CAUTION symbols and their implications for injury or damage.
Warns against charging dry-cell batteries, equalizing Gel/AGM, and risks of explosive gases.
Advises on extension cord use, avoiding damaged cords/plugs, and not submerging the unit.
Steps for preparing a battery and guidelines for charger placement.
Procedures for connecting clamps and preventing sparks near the battery.
Safety steps for connecting/disconnecting clamps when the battery is removed.
Introduces the 3-stage charging and microprocessor control of the charger.
Lists the main features: charge rates, engine start, digital diagnostics.
Describes the control panel layout, digital display, and function buttons.
Explains the digital display, fault codes (F01-F07), operation codes, and LED indicators.
Details how to select the appropriate charge rate (2A, 10A, 30A) for different batteries.
Step-by-step guide for connecting, setting, and charging a battery.
Explains float charging for maintaining a full battery charge over time.
Details the equalization process for wet batteries, with warnings for Gel/AGM.
Instructions for using the 80-amp engine start feature for quick starting.
Guide on testing the vehicle's alternator under no-load and load conditions.
Explains common display indications and fault codes (F01-F06) and their solutions.
Provides a table estimating charging times based on battery charge percentage and rate.
Advises on charging batteries in cold temperatures and avoiding frozen batteries.
Recommendations for cleaning, storing, and maintaining the charger for longevity.
Details where to get service and lists the technical specifications of the charger.
