D
Deborah RodriguezJul 27, 2025
What to do if my Black & Decker Battery Charger is not charging?
- AAaron BrowningJul 27, 2025
If your Black & Decker Battery Charger isn't charging, try these steps: * Ensure the charger is properly connected to a live 120 volt AC outlet; the LED should illuminate. * Verify that the correct voltage setting has been selected for the battery you're maintaining. * Make sure output connections are secure. * Check for correct polarity connections. Also, if the maintainer doesn't detect battery voltage, the unit won't run. If the battery has fallen below 2 volts, it cannot be recharged with this unit.