To Next PageTo Next PageWhat to do if Black & Decker BCS25EB clamps are reversed?
If the status LED lights red and a continuous warning tone sounds, it means the connections to the battery’s positive and negative terminals are incorrect. Observing the “Important Safety Instructions”, disconnect the AC cord and clamps, then reconnect to the battery with correct polarity.
What to do if charging very cold battery with Black & Decker BCS25EB?
If the battery to be charged is very cold (in temperatures below freezing — 0°C/ 32°F), never attempt to charge a frozen battery.
Why Black & Decker BCS25EB Battery Charger does not come on?
If the unit does not come on after being properly connected to the battery, either it is not connected properly to the terminals or the voltage of the battery to be serviced is too low (below 3 volts).
General| Brand | Black & Decker |
|---|---|
| Model | BCS25EB |
| Category | Battery Charger |
| Language | English |
Provides essential safety guidelines for operating battery chargers in various environments and situations.
Steps to prepare the battery and charger before initiating a charge.
Recommendations for safely positioning the charger during use.
Safety steps for connecting and disconnecting charger clamps to prevent sparks.
Lists the key capabilities and technologies of the battery charger.
Explains the use of the control knob for selecting charger modes.
Describes the information shown on the LCD screen during operation.
Explains how the charging gauge indicates the battery's charge status.
Details the process and indicators for the automatic battery charging mode.
Outlines the steps to test the vehicle's alternator performance.
Instructions for using the engine start function and its limitations.
Explains error messages for Smart Charge and recommended actions.
Explains error messages during alternator testing and recommended actions.
Guidelines for cleaning and maintaining the charger for longevity.
Information on recommended accessories and how to obtain service.
