To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker BC25EB and is the answer not in the manual?
General| Brand | Black & Decker |
|---|---|
| Model | BC25EB |
| Category | Battery Charger |
| Language | English |
Guidance on selecting appropriate extension cords for outdoor use, including a table for wire gauge.
Defines safety terms like DANGER, WARNING, and CAUTION used in the manual to indicate hazard levels.
Critical safety measures for handling batteries, electrical components, and avoiding hazards like shock and explosions.
Procedures for handling battery acid contact and ensuring proper electrical grounding for safety.
Essential steps to prepare a battery before connecting the charger, including cleaning terminals.
Recommended locations to ensure safe operation and protect the charger from battery gases and damage.
Safe practices for attaching and detaching the charger's DC output clamps to battery terminals.
Detailed instructions for connecting the charger to a vehicle battery when it is installed.
Detailed instructions for connecting the charger to a battery that has been removed from the vehicle.
An introduction to the Black & Decker Battery Charger and its key features like high charge rate.
Highlights the various capabilities and technologies of the battery charger, including charge rates and diagnostics.
Details the function of buttons and indicators on the charger's control panel for operation.
Describes the purpose of each function button, such as battery type selection and charge rate.
Instructions on how to choose the appropriate charging current for different battery sizes via the 4/10/20/40 AMP button.
Guide on activating and using the 110 amp engine start feature for quick vehicle starting.
Information on the battery reconditioning process to restore performance of sulfated batteries.
How to use the charger to check battery voltage and test the vehicle's alternator output.
Interpretation of the digital display, fault codes (F01-F07), and operation codes.
Explains the meaning of the various LED lights on the control panel, such as WET, GEL, AGM, and FLOAT.
A reminder to follow safety and operating instructions before using the charger.
Detailed steps on how to adjust the charge rate using the 4/10/20/40 AMP button.
Comprehensive instructions for charging a battery, including selecting type, rate, and monitoring.
How to use the float charge feature to keep a battery topped off over long periods of non-use.
Information on the equalization process for wet batteries to balance cell voltages.
Detailed steps for performing the equalization process on wet batteries, including safety warnings.
Instructions for using the 110 amp engine start function for quick vehicle starting.
Detailed steps and considerations for using the battery reconditioning mode on sulfated batteries.
Steps to initiate and monitor the 24-hour battery reconditioning process.
Instructions for testing the vehicle's alternator output under no-load and load conditions.
Estimated times required to charge batteries based on their charge level and selected charge rate.
Troubleshooting common issues indicated by the charger's display, such as 'No Functions'.
Detailed explanations for various fault codes (F01-F07) displayed by the charger and recommended actions.
Guidance on charging batteries in very cold temperatures and the impact on charge rate.
Recommendations for maintaining the charger, including cleaning clamps and cords, for longevity.
Information on recommended accessories for use with the battery charger and how to obtain them.
How to get technical advice, repair, or replacement parts from Black & Decker service centers.
Details of the five-year limited warranty for the battery charger and how to make a claim.
Key technical details and operational parameters of the battery charger, including input and output ratings.
